Sodium Hexametaphosphate Sodium Phosphate Manufacturers SDS

Anmol Chemicals is the pioneer manufacturers of Sodium hexametaphosphate & Sodium phosphate monobasic dibasic tribasic, Pharmaceutical Excipients Fragrance Food & Flavor chemicals in India. We offer Halal and Kosher Sodium hexametaphosphate made in an ISO9001, ISO22000 (FSSC22000) cGMP and GLP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Sodium hexametaphosphate is in these pages.

The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal

MSDS Sheet of Sodium Hexametaphosphate Manufacturers, Hexa Meta

Synonyms: Hexametaphosphate, sodium salt; SHMP; Metaphosphoric acid, hexadosium salt; Sodium polyphosphates, glassy.
CAS Number: 68915-31-1
EINECS EC Number: 272-808-3
Molecular Weight: Mixture
Chemical Formula: Na(x+2) Px O(3x+1) x = 6 to 21
Intended Use: Industrial Manufacturing

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes eye irritation.

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.

Ingredient: Sodium Hexametaphosphate
CAS Number: 68915-31-1
EINECS EC Number: 272-808-3
Percent: 97-100%

Inhalation: Remove to fresh air. Get medical attention for any breathing difficulty.
Ingestion: Give large amounts of water to drink. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention if irritation develops.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting upper and lower eyelids occasionally. Get medical attention if irritation persists.

Fire: It is not considered to be a fire hazard.
Explosion: It is not considered to be an explosion hazard.
Fire Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Use means suitable for extinguishing surrounding fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.

Ventilate area of leak or spill of Sodium Hexametaphosphate. Wear appropriate personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Avoid breathing dust.
Spills: Sweep up and containerize for reclamation or disposal. Vacuuming or wet sweeping may be used to avoid dust dispersal. Small amounts of residue may be flushed to sewer with plenty of water.

Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Isolate from incompatible substances. Containers of Sodium Hexametaphosphate may be hazardous when empty since they retain product residues (dust, solids). Observe all warnings and precautions listed for the product.

Airborne Exposure Limits: None established for Sodium Hexametaphosphate.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles. Maintain eye wash fountain and quick-drench facilities in work area.

Appearance: Sodium Hexametaphosphate is white powder.
Odor: Odorless.
Solubility: Soluble in water.
Specific Gravity: 1.25
pH: No information found.
% Volatiles by volume @ 21C (70F): 0
Boiling Point: 1500C.
Melting Point: reported as 628C (Information varies)
Vapor Density (Air=1): No information found.
Vapor Pressure (mm Hg): No information found.
Evaporation Rate (BuAc=1): No information found.

Stability: Sodium Hexametaphosphate is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Sodium and phosphorus oxides may form when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Oxidizing Agents, Heat
Conditions to Avoid: Incompatibles.

Oral rat LD50: 3053 mg/kg.
Oral Mouse LD50: 4320mg/kg
Dermal rabbit LD50: > 7.940 mg/kg
Carcinogenic Effects: Not a reported carcinogen by IARC, NTP, ACGIH, OSHA

Environmental Fate: No information found on Sodium Hexametaphosphate.
Environmental Toxicity: No information found.

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.

DOT (USA) & ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods

USA:
TSCA 12(b): No
Hazard Categories Under Title III Rules (40 CFR 370): None
Section 302 Extremely Hazardous Substances: None
SARA 311/312: None
Section 313 Toxic Chemical(s): None
CERCLA Reportable Quantity: Not applicable
USA TSCA: Listed
HMIS (Perceived): Health Rating: 2, Flammability Rating: 0, Reactivity Rating: ) – 0
NFPA (Perceived): Health Rating: 2, Flammability Rating: 0, Reactivity Rating: ) – 0

Disclaimer:
********************************
Our company provides this SODIUM HEXAMETAPHOSPHATE SDS information sheet contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. SODIUM HEXAMETAPHOSPHATE MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
********************************

SHMP Sodium hexametaphosphate Manufacturers
Sodium phosphate monobasic dibasic tribasic Manufacturers

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564 - FAX: 91-22-23728264

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Russia, Ukraine, Korea, Japan, etc.

MSDS Sheet of Sodium Hexametaphosphate Manufacturers, Hexa Meta

SHMP Sodium hexametaphosphate Manufacturers Sodium phosphate monobasic dibasic tribasic Manufacturers

SHMP Sodium hexametaphosphate Manufacturers
Sodium phosphate monobasic dibasic tribasic Manufacturers